This position is on 2nd or 3rd shift and the hours are 3:00 p.m. to 11:30 pm or 11:00 p.m. to 7:30 a.m. Monday - Friday.

Qualifications

Must be able to lift 50 lbs. and be able to push/pull up to 1000 lbs. on mold carts or crane system

Must be able to work overtime on weekdays and on weekends when needed.

Must be able to follow setup instructions.

Must be able to climb ladders.

Must be able to read gages.

Must be able to follow a written schedule of numbers and dates

1. Arrive at your work cell at the scheduled start time of your shift.

2. Participate in a pass down during the overlap of shifts. (plants 2&3)

3. Re-stock necessary supplies for the oncoming shift during overlap. (plants 2&3)

4. Remain at your work cell until the scheduled end time of your shift.

5. Operate the work cell you are assigned to. This may include multiple molding machines, secondary part

operations, or other part related processes.

6. Understand eye-path and part quality expectations (per operations manual)

7. Perform 1 quality check at the beginning of your shift on each machine or part.

8. Maintain achievement of work cell expected rates. Report rate achievement issues to your supervisor.

(i.e. production cell running slow etc)

9. If the molds that you are running require cleaning at the beginning of your shift, perform this task as

designated by the work instructions.

10. It is a requirement to be able to start up and shut down machines properly. It is not always a

requirement to perform this task. Refer to your operations manual for details.

11. Must complete Rockware Training and Paulson Training.

12. Accurately and timely input data into Rockware such as scrap and other production codes.

13. Contact the appropriate people regarding quality, machine and other work related issues. This can be

done at your work cell tablet.

14. Operate your cell following the instructions in the manual. Standard work must be followed to best

Production Cell Operator