The Anticipated closing date of this job posting is September 11, 2026.

Actual compensation within the range will be determined based on experience, skills, and qualifications considerations.

Job Summary (the purpose and general nature of the job):
The R&D Mechanical Engineer IV will possess expert knowledge of engineering principles and will execute, and lead product development activities as directed by immediate and upper-level management with little or no guidance. This role is responsible for driving designs from concept through commercialization, ensuring designs meet performance, cost, manufacturability, quality, safety, and compliance requirements. The R&D Mechanical Engineer IV supports the global Stolle community by providing technical expertise, data-driven recommendations, and effective communication to management, manufacturing, assembly, field service, vendors, and customers to enable smooth product transitions. This position assumes end-to-end ownership of assigned projects, including providing project direction, making decisions required for project success, and driving the project’s financial outcomes.

Project Leadership Responsibilities:
May provide technical leadership and project direction responsibility, including:

Technical mentoring and training of engineers on Stolle standard operating procedures and design best practices
Task delegation and coordination across engineering resources as needed to meet project goals
Quality control of engineering output (drawing checks, model checks, design reviews, test plan reviews)
Monitoring project budgets, timelines, and engineering labor estimates in coordination with management

Duties/Responsibilities:

Provides advanced engineering support as required to the global Stolle community while drawing from a wide breadth of expert engineering knowledge.
Maintains involvement with assigned projects from design inception through commercialization; leads technical execution through design, build, test, trial, and implementation phases.
Assumes end-to-end ownership of assigned projects and is responsible for overall project success (technical performance, schedule, cost, manufacturability, and quality); drives issues to closure and escalates risks early with clear options and recommendations.
Provides project direction within scope by making timely, well-supported technical decisions; aligns stakeholders, establishes priorities, and drives the financial outcomes of the project through accurate estimating, design-to-cost decisions, and active delegation of engineering tasks while monitoring material spend.
Provides sales and marketing support on new ideas and cutting-edge, industry-changing technology; contributes to value proposition development and customer-facing technical discussions.
Accurately estimates material cost and engineering labor on design projects; supports profitability/ROI analysis and design-for-cost decisions.
Develops, documents, and communicates requirements; proactively revalidates requirements and performs what-if/contingency planning to mitigate design/test/trial risk.
Offers creative, unique, and effective design solutions when presented with complex engineering problems; executes advanced problem solving and root cause analysis.
Creates and releases complete drawing packages and models using CAD/PDM; including configurations, product structure, and bill of materials creation/management in CAD/ERP.
Designs components and systems across varied manufacturing processes, including sheet metal, mill/lathe parts, weldments, cast parts, assemblies, mechanisms, and tooling as applicable.
Performs and/or coordinates analysis activities such as hand calculations/rough evaluation, power/utility/torque calculations, gearing and mechanism (dynamics) analysis, fatigue/life calculations, statistical analysis, and finite element/structural analysis as appropriate.
Develops test plans, acceptance criteria, and test rigs/fixtures as needed; executes functional and longevity testing; analyzes and documents results to support sound engineering conclusions.
Supports dimensional/alignment/measurement and inspection activities (as needed) to validate designs and troubleshoot issues.
Supports offsite tests, trials, and field activities as required; including field trial planning/monitoring, site installation coordination, and customer support (domestic and international travel as needed).
Communicates and supports purchasing, planning, manufacturing, quality inspection, assembly, field service, vendors, and OEM engineering regarding part design, machine assembly, and component/product optimization requests.
Engages with vendors regarding process selection, tolerances, lead times, and cost; identifies/evaluates vendors; supports part quoting, vendor identification, and procurement support.
Supports build activities including part chasing, assembly/manufacturing support, and hands-on fabrication/assembly operations as required to enable rapid learning cycles and solution implementation.
Leads or supports engineering change request evaluation and execution; ensures robust documentation and configuration control.
Works with management to develop DFMEA, DFM, Hazard & Risk Assessment, CE documentation, cost analysis, and other supporting documents for product transitions to commercial sales.
Investigates new technology for implementation into new designs; performs competitor/patent research and supports intellectual property development (including patent application development/submission where applicable).
Documents workflow and individual design history; develops SOPs, training documentation, and presentations; can present to management and cross-department stakeholders with short notice.
Collaborates effectively across departments; demonstrates diplomacy, resiliency, initiative, and a strong propensity to collaborate while contributing to a positive team culture.

Knowledge/Experience/Skills:

Expert knowledge of GD&T principles and Stolle drawing standards; able to define inspection requirements.
Understanding of material properties and their application to new designs; including raw material, coating/plating, manufacturing process, lubrication, pneumatic, and vacuum system design as applicable.
Intermediate understanding of finite element principles; capable of performing and interpreting structural FEA when needed.
Advanced analytical and problem-solving skills; capable of root cause analysis, risk analysis, and data-driven decision-making with rapid turnaround time.
Demonstrated project ownership mindset: takes responsibility for outcomes, drives decision-making, manages tradeoffs, and understands how engineering choices impact margin, cost, and overall project financial performance.
Capable of writing and facilitating test plans; defining acceptance criteria; designing test rigs; executing and analyzing functional and longevity testing.
Experience with DFM and DFMEA analysis; hazard and risk assessment; and supporting compliance documentation (e.g., CE documentation).
Experience with DOE and application to real-world engineering problems; strong statistical analysis capability.
Minimum 12 years’ experience with CAD software (Solidworks, Solid Edge, Creo, AutoCAD, with preference for Solidworks) and PDMs; understands and can implement design configurations and product structure management.
Solid interpersonal skills with strong technical communication and presentation ability; able to host customer and stakeholder technical conversations as needed.
Excellent organizational skills and attention to detail; excellent time management with a proven ability to meet deadlines and manage project timelines.
Ability to function well in a fast-paced, dynamic environment; demonstrates resiliency and initiative.
Proficient with Microsoft Office Suite; advanced data analysis skills in Excel or Minitab; able to generate clear documentation (SOPs, training documents, reports).
Working knowledge of ERP processes (e.g., BOM creation/release, change orders, sourcing and purchasing information) to support product development transitions.
Vendor interaction capability (quoting, negotiation, lead time/cost/tolerance discussions) and cross-functional coordination with purchasing, manufacturing, quality, assembly, and field service.
Able to obtain a passport and travel both domestically and internationally, including extended durations when needed.
Understanding of Six Sigma principles.

Education and Experience:

Minimum 12 years of engineering experience.
Bachelor’s and/or Master’s degree in Mechanical Engineering or related field.
Experience in manufacturing and/or product development environment.
Proven track record of sound engineering judgment, robust documentation, and successful product transition support.

Physical Requirements:

This position requires the ability to perform the essential duties and responsibilities in the following environment:

Prolonged periods of sitting at a desk and working on a computer.
Must be able to lift up to 15 pounds at times (office environment).
Must be able to lift up to 50 pounds at times (plant floor environment).

Disclaimer

This position description is intended to provide a general overview of the responsibilities, duties, qualifications, physical demands, and working conditions associated with the role. It is not designed to be a comprehensive or exhaustive list of all job functions, responsibilities, or requirements. Employees may be required to perform additional duties as assigned to meet the needs of the business. Stolle Machinery Co., LLC reserves the right to modify, interpret, amend, or discontinue any part of this position description at any time, with or without notice.

Equal Employment Opportunity Statement

Stolle Machinery Co., LLC is committed to providing equal employment opportunities to all employees and applicants. Employment decisions are based on qualifications, merit, business needs, and job-related factors. The Company does not discriminate on the basis of race, color, religion, sex, including pregnancy, childbirth or related medical conditions, national origin, age, disability, veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law.

Learn more about this Employer on their Career Site