GLENDALE PLYWOOD BENEFITS:

Fuel Pump access (gas at cost-payroll deduct)
401K with a company match
HSA with a company match
Medical, Dental, Life and Vision Insurance
Virtual Primary Care/Urgent Care through First Stop Health (Eligible day 1 of employment for you and your household)

Position Title: General Plant Forklift Driver

Reports To: Department Lead/Supervisor

Department: Determined Upon Hire

Hours per shift: Employee works 10-hour shifts, with three 10- minute breaks, and a 30- minute unpaid lunch break.

Wage: Level 3

Position Purpose: The purpose of the General Plant Forklift Driver is to train in all departments for all driving positions. During training period General Plant Forklift Driver will be expected to fill in for absent drivers, help on shift drivers with tasks and keep up with production in department assigned to them. Once an open bid comes up for a forklift operator the most senior General Plant Forklift Driver will be placed into the open bid.

Position Functions:

General Plant Forklift Driver: Essential Functions*

These duties are designated as ADA Essential Functions and must be performed in this job.

Perform daily pre-inspections of equipment, completing required paperwork and reporting any maintenance issues immediately.

Safely, pull full carts of dry and wet veneer away from the grade chains, paint, tag, and stack them neatly and in designated areas. Keep the immediate work area free of veneer and wood debris and keep sticker racks organized.

Place veneer on carts in the Raimann room. Remove veneer from graded Raimann carts and paint, tag, and stack the veneer.

Give breaks and help other departments and drivers. Cleanup will be done on a continual basis to ensure a clean, organized and safe work environment.

Follow all company policies and SOPs for safe forklift operation

Monitor veneer units for stack quality and grades that match the grade of the unit.

Comply with Federal, State, and Company rules, policies and procedures.

Rotate to different positions for cross training

Wet kiln tracks down when pulling and pushing kilns in the summer months

Perform once a day blow downs in winter months and twice a day in summer months

Perform preventive maintenance on forklift and follow greasing procedures

Non-Essential Functions

These duties are secondary in nature and are not classified as ADA essential.

The worker may be responsible for cleanup activity during down times or between shifts. This activity will consist of removing debris from the work area using a broom, rake, or shovel.

The worker may be required to rotate to different positions for cross-training purposes or to facilitate production. Job duties for other positions are outlined in their individual Job Descriptions.

Working Environment: (1) Inside 90%, average temperature 80 degrees, extreme low temperature 10 degrees F, extreme high temperature 120 degrees F. (2) Outside 10%. Noise or vibration: Machine noise to include machine being operated as well as other machines close by including Forklifts. Hazards: See Job Hazard Analysis. (3) Atmospheric conditions: Dust: Limited, Mist: Water, Odors: Dry wood, Gasses: None, Poor Ventilation: None. The worker in this position will be standing on a slightly elevated wooden platform with rubber mats. The worker will move back and forth on this platform in front of an elevated dry conveyor measuring 3 ½ to 4’ above the ground. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Personal Protective Equipment Required: (1) Eye Protection. (2) Hearing Protection. (3) Rubber or Leather based gloves when handling lumber (4) Approved Footwear.

Physical Demands: See the attached Job/Task Evaluation and Physical Capabilities portion; this position requires constant use of hearing and vision, frequent bending, twisting, pushing/pulling and reaching, and occasional lifting/carrying/pushing/pulling more than 50 lbs.

Skills: (1) must have excellent hand eye coordination. Use vision/hearing continuously and must have peripheral vision to see forklifts and co-workers. Reading and speech required to communicate comprehension of Job Hazard Analysis, machine specific lockout procedures, monthly safety training, etc. Worker generally works with another clean up member with little supervision. Clean up members must be self-directed in identifying and efficiently completing each task. Ability to prioritize, organize, and make necessary decisions.

Safety: (1) Do only maintenance you are trained to do and keep all body parts out of machinery. (2) Always use our 14-step lockout/tagout procedure before doing any maintenance, clearing jams, or getting into machinery for any reason; be aware of stored energy. (3) Always use proper body mechanics (ex: don’t overreach, get help as needed to push loads out). (4) Use proper PPE (gloves, eye protection, hearing protection). (5) Be aware of and always communicate with your co-worker (ex: forklift driver). (6) Will be required to read and write during safety training.

ENDURANCE	Never/Not Required	Seldom 1-5%	Occasionally 6-33%	Frequently 34-66%	Continuous 67-100%	Total hours at one time	Total hours in a workday
SITTING					X		10
STANDING					X	2	10
WALKING					X	2	10
CHANGE POSITIONS					X

PHYSICAL REQUIREMENTS: (Enter actual maximum weight in pounds in the box)
LIFTING	Never/Not Required	Seldom 1-5%	Occasionally 6-33%	Frequently 34-66%	Continuous 67-100%
1-10 LBS					10 LBS
11-20 LBS					20 LBS
21-50 LBS					50 LBS
51-75 LBS	75 LBS
76-100 LBS	100 LBS
>100 LBS	>100 LBS
Maximum weight lifted by worker without assistance: 50 LBS If required, lifting over 50 LBS is performed with two or more people and/or lifting devices.

CARRYING	Never/Not Required	Seldom 1-5%	Occasionally 6-33%	Frequently 34-66%	Continuous 67-100%
1-10 LBS					10 LBS
11-20 LBS					20 LBS
21-50 LBS					50 LBS
51-75 LBS	75 LBS
76-100 LBS	100 LBS
>100 LBS	>100 LBS
Maximum weight carried by worker without assistance: 10-50 LBS If required, carrying over 50 LBS is performed with two or more people and/or lifting devices.

PUSHING/PULLING FORCE TO BE EXCERTED	Never/Not Required	Seldom 1-5%	Occasionally 6-33%	Frequently 34-66%	Continuous 67-100%
1-10 LBS					10 LBS
11-20 LBS					20 LBS
21-50 LBS					50 LBS
51-75 LBS	75 LBS
76-100 LBS	100 LBS
>100 LBS	>100 LBS
Maximum weight of object pushed/pulled by worker: 50 Lbs. Distance: 4’ Type of surface (i.e. level, carpet, incline): Level / Incline

OTHER	Never/Not Required	Seldom 1-5%	Occasionally 6-33%	Frequently 34-66%	Continuous 67-100%
BEND/STOOP				X
TWIST				X
CROUCH/SQUAT				X
KNEEL				X
CRAWL	X
WALK-LEVEL SURFACE				X
WALK-UNEVEN SURFACE				X
CLIMB STEPS				X
CLIMB LADDER				X
WORK AT HEIGHTS				X
REACH AT OR ABOVE SHOULDER				X
REACH BELOW SHOULDER				X
USE OF ARMS				X
USE OF WRISTS				X
USE OF HANDS				X
GRASPING/SQUEEZING				X
OPERATE FOOT CONTROLS			X

ENVIRONMENT
INSIDE:	90%
OUTSIDE:	10%
TEMPERATURE EXTREMES:	YES
VIBRATION:	NO
WORKS ON OR AROUND MOVING MACHINARY OR MECHANICAL PARTS:	YES

PERSONAL PROTECTIVE EQUIPMENT
BOOTS	YES	HARDHAT	NO	GLOVES	YES	EYE PROTECTION	YES	HEARING PROTECTION	YES	OTHER?

The information provided in this job description, including strength and physical requirements, is based on observation of the job and is accurate to the best of my knowledge.

Learn more about this Employer on their Career Site

General Plant Forklift - Swing - Glendale, OR